Aalco carries over 10,000 stock items covering a wide range of grades/alloys, shapes and sizes, and can cater for all your metal needs - from industry standards to special or bespoke items for particular applications or individual customers.
Aalco stock range of DNV Certified Marine Extrusions in Aluminium Alloy 6082T6.
Range includes Flat Bar, Tube, Tee, Angle, Channel, I-Beam, Bulb Bar and Rider Bar.
| Chemical Element | % Present |
|---|---|
| Lead (Pb) | 0.05 max |
| Tin (Sn) | 0.05 max |
| Copper (Cu) | 0.1 max |
| Nickel (Ni) | 0.1 max |
| Titanium (Ti) | 0.2 max |
| Zinc (Zn) | 0.2 max |
| Chromium (Cr) | 0.25 max |
| Iron (Fe) | 0.5 max |
| Manganese (Mn) | 0.4 - 1 |
| Magnesium (Mg) | 0.5 - 1.2 |
6082
| Physical Property | Value |
|---|---|
| Density | 2.7 g/cm³ |
| Melting Point | 555 °C |
| Thermal Expansion | 24 x10^-6 /K |
| Modulus of Elasticity | 70 GPa |
| Thermal Conductivity | 180 W/m.K |
| Electrical Resistivity | 0.038 x10^-6 Ω .m |
Flat Bar: 40mmx5mm / 40mmx6mm / 50mmx6mm / 80mmx6mm / 80mmx8mm / 100mmx8mm
Rider Bar: 50mm / 80mm
Bulb Bar: 50mm / 76mm
Bulb Flat: 98.7mmx19mm
Channel: 200x80x8x12
Equal Angle: 50mmx50mmx6mm
Equal Tee: 38.1x4.76 / 40x4 / 50x4 / 50.8x6.3
I-Beam: 203x76x7x10
Tube (O/D x Wall): 38.1mmx4.76mm / 114.3mmx6.3mm / 50.8mmx4mm / 1inx10g / 1.25inx10g / 6.5inx0.25in / 3inx0.25in
This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.
Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.
The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers' data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.
Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.
As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.
Advice given by the Company to any third party is given for that party's assistance only and without liability on the part of the Company. All transactions are subject to the Company's current Conditions of Sale. The extent of the Company's liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.
